Epson Stylus PRO 7500 Service Manual page 202

EPSON Stylus Pro 7500
printed in hexadecimal, with each number incremented by 2 from the number of the
pattern to its left, but in this menu, it is possible to input each of the 16 numbers in
hexadecimal. After inputting a value, press the Enter button.
10. "ND Y: XX" will be displayed in the LCD. In this menu, input the pattern No. of the
pattern among the 8 light cyan printed patterns which was confirmed to be proper using
the Paper Feed + and – buttons. The pattern No. on the printed pattern has the numbers
printed in hexadecimal, with each number incremented by 2 from the number of the
pattern to its left, but in this menu, it is possible to input each of the 16 numbers in
hexadecimal. After inputting a value, press the Enter button.
11. Make sure the message "Bi-D End" is displayed in the LCD, then move to the next
adjustment item.
Adjustment
n
Up to Bi-D adjustment patterns No. 1 ~ 3, by deciding the value
input from the panel, the adjustment results are printed out, so it
is possible to check the adjustment results visually, but for Bi-D
adjustment pattern No. 4, even if you decide a value to input
from the panel, a printing pattern that reflects the adjustment
results is not printed, so the adjustment results cannot be
checked visually. Therefore, if you are confirming the
adjustment results for adjustment values by printing pattern, the
following DOS program becomes necessary.
* Program Transfer Utility: Pout3.Exe
* Program Name: Bid333.prn
The program transfer method is as follows.
1) Confirm that the printer is in the Pause state.
2) Move to the DOS prompt.
3) Input "POUT__BID333.PRN."
4) Press the Enter key.
Through the above operation, a total of 9 blocks of printing patterns are
printed out in each color. The results from the adjustment values input in
the Adjustment mode are positioned in the center pattern of the 9-block
pattern of each color.
Adjustment Results
Figure 5-29. Bi-D #4 Adjustment Value Check Pattern
n
Above check pattern are included in the Stylus PRO 7500
Adjsutment program also.
Adjustment Steps
Revision A
Adjustment Result
202