Important Maintenance Items During Service Operations - Epson Stylus PRO 7500 Service Manual

EPSON Stylus Pro 7500
6.1.3 Important Maintenance Items During Service
Operations
Check the following items during printer maintenance/service and perform any necessary
operations.
Table 6-3. Items to be Checked During Maintenance/Service
Items
Make sure no paper, dust,
Lower Paper Guide and
or foreign objects are
the surface of the
attached or have
Subplaten
accumulated.
Timing Fence (Slitted Is there any accumulation
plate for CR encoder or adhesion of paper dust
detection.) or foreign matter?
Rail on the CR guide Make sure there are no
frame foreign objects attached.
Make sure no paper, dust,
P_REAR sensor and or foreign objects are
P_FRONT sensor surface attached or have
accumulated.
Maintenance
Check Points Remedy
Cleaning (If there is an ink
stain, wipe with dry, clean
cloth after cleaning the ink
stain with damp cloth.)
Clean
If there is any damage,
replace the part.
Cleaning
Cleaning
General Maintenance Issues
Revision A
239