Maintenance Mode 2 - Epson Stylus PRO 7500 Service Manual

EPSON Stylus Pro 7500

1.6.8 Maintenance Mode 2

The operation described here is a special function for the sake of
service support and public disclosure to the end user is prohibited.
o
Starting Method
While pressing the following panel buttons, turn the power switch On to start
Maintenance Mode 2.
n
[Paper Source Button] + [Eject Button] + [Paper Feed – Button]
The top menu of this mode consists of the following items.
Table 1-39. Maintenance Mode 2 Top Menu
Item
Counter Display Menu
Counter Initialization Menu
Adjustment, Setting Menu
o
Operation Method:
(1) By pressing the SelecType button, the screen changes to the above item
display.
(2) When the necessary item is displayed, press the Paper Source button once to
enter the display menu for that item.
n
When the Counter Display Menu is displayed.
Press the Paper Source button to switch display items.
n
When the Counter Initialization Selection menu is displayed.
Press the Paper Source button to switch display items, then press the Enter button
to carry out initialization of that item.
n
When the Adjustment Menu is selected.
By pressing the Paper Source button, change the display items and display the
necessary item. An asterisk is displayed at the end of the displayed setting value as
shown below.
Product Description
Panel Display
VIEW COUNTERS MENU
CLEAR COUNTERS MENU
SERVICE CONFIG MENU
Panel Setting Menu
[Setting Item] = [Current Setting Value] *
The "*" on the end shows that this is the current setting value.
With the setting item displayed, press the Paper Feed + button, or the Paper Feed –
Button. Each time these buttons are pressed, the settable values are displayed one at a
time in sequence with the format "[Setting Item] = [Setting Value] (*).
The values are displayed in reverse sequence when the Paper Feed – Button is pressed.
If you continue pressing the Paper Feed + Button or the Paper Feed – Button, the
setting values will be displayed at predetermined intervals in forward or reverse
sequence. If you continue to press these buttons , the values displayed will change
continuously and will become faster.
If the Enter button is pressed, the setting value that is currently displayed will be set as
the current setting value and registered. The items that accompany this operation will
also be started. However, nothing happens if a "*" is already displayed by the item.
(5) In the Setting Item selection mode, if the SelecType button is pressed, the printer
returns to display of Maintenance Mode 2.
o
End Method:
(1) Turn the printer OFF, then ON.
Revision A
50