Epson Stylus PRO 7500 Service Manual page 52

EPSON Stylus Pro 7500
o
Counter Initialization Menu
Table 1-41. Counter Initialization Menu
Item
NVRAM / Timer / Service Life
Counter / Mechanism Counter INIT. ALL *1
Initialization
NVRAM Initialization NVRAM INIT *2
Timer Initialization INIT *3
CR Motor Service Life Initialization INIT. CR MTR *4
PF Motor Service Life Initialization INIT. CR MTR *5
Head Unit Service Life Initialization INIT. HEAD *6
Cleaning Unit Service Life
INIT. CLEANER *7 EXEC.
Initialization
Total Printed Page count Initialization INIT. TTL PR *8
Ink Level Initialization INIT. INK *9
Waste Ink Capacity Initialization INIT. WA. INK *10
*1: By running this mode, the NVRAM, timer, service life counters and mechanism counters are
initialized.
*2: By running this mode, the NVRAM is initialized.
*3: By running this mode, the timer setting value is initialized.
*4: By running this mode, the CR motor service life counter is initialized.
*5: By running this mode, the PF motor service life counter is initialized.
*6: By running this mode, the head unit service life counter is initialized.
*7: By running this mode, the cleaning unit service life counter is initialized.
*8: By running this mode, the total number of printed sheets counter is initialized.
*9: By running this mode, the ink level counter is initialized.
*10: By running this mode, the waste ink capacity counter is initialized.
Product Description
Panel Display Setting Value
EXEC.
EXEC.
EXEC.
EXEC.
EXEC.
EXEC.
EXEC.
EXEC.
EXEC.
o
Adjustment Setting Menu
Table 1-42. Adjustment Setting Menu
Item
Bi-d adjustment pattern #3 offset
(333cps, Normal dot)
MW2 Balance
*1:This sets the desired offset for reducing uneven printing (against the CR movement direction)
with respect to the Bi-D adjustment value adjusted by the user. This mode is a function for
reducing irregular color that occurs in the 720 dpi x 720 dpi and 1440 dpi x 720 dpi printing
modes due to setting of the desired offset with respect to the adjustment values for Bi-D
adjustment values (Bi-D adjustment pattern No. #3) for these printing modes. However, since
there are cases where there is no effect even when the desired offset is set in this function,
adequate caution should be exercised when changing the setting values
2 : This function is to improve the micro banding which may appear in the 720dpi x360
dpi, or 720dpi x 720dpi mode. Changing this setting value, the micro banding may be
improved a little.
However, since there are cases where there is no effect even when the
desired offset is set in this function, adequate caution should be exercised when changing the
setting values
Panel Setting Menu
Revision A
Panel Display Setting Value
Bi-d offset *1 -4 - 0 - +4
MW7 Balance *2
-31 - 0 -+31
52