Epson Stylus PRO 7500 Service Manual page 103

EPSON Stylus Pro 7500
4.2.1.2 R Side Cover Removal
1. Remove the control panel unit as described in 4.2.1.1 "Panel Unit Removal".
2. Open the roll paper cover.
3. Push back the Paper Set Lever to the released position, remove two black screws
(CBP: M4x10) from the lever handle, and remove the handle.
4. Using a (-) driver or similar tool, remove the lever opening cap. The cap may fall
through the hole, so it is recommend you secure the cap between your finger and the
driver as you remove the cap.
lever blind cap
Figure 4-6. R Side Cover Removal 1/4
Disassembly & Assembly
paper set lever
screws(CBP:M4x10)
Disassembly Flow
5. From the rear side, remove one white screw (CUPS:M4x8) and from the right side
remove two white screws (CUPS:M4x8).
Roll paper cover
Figure 4-7. R Side Cover Removal 2/4
R_side cover
Figure 4-8. R Side Cover Removal 3/4
Revision A
screws(MA4x10)
.
screws(M4x8)
103