Mezzanine Cards; Removing The Sas Mezzanine Card - Dell PowerEdge C8220X Hardware Owner's Manual

1 memory module
3 alignment key
4 Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 277.
5 Close the sled. See "Installing the Front and Back Sled Covers" on
page 180 or "Installing the Sled Cover" on page 183.
6 Replace the sled. See "Installing a Sled" on page 156.

Mezzanine Cards

The sled supports a variety of optional mezzanine cards.
• LSI 2008 6 Gb SAS mezzanine card
• Mellanox QDR ConnectX-2 Infiniband mezzanine card
• Mellanox FDR ConnectX-3 Infiniband mezzanine card
• Intel 82599 dual-port 10 GbE mezzanine card

Removing the SAS Mezzanine Card

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the enclosure. See "Removing a Sled" on page 155.
2 Open the sled. See "Removing the Front and Back Sled Covers" on
page 176 or "Removing the Sled Cover" on page 181.
2 memory module socket ejectors (2)
Installing System Components
291