Installing The Megaraid Sas 9285Cv-8E Raid Battery - Dell PowerEdge C8220X Hardware Owner's Manual

6 Pry one end of the RAID battery and pull the battery straight out of the
battery holder. See Figure 3-42.
Figure 3-42. Removing and Installing the RAID Battery
1 battery holder

Installing the MegaRAID SAS 9285CV-8e RAID Battery

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Orient the new RAID battery appropriately in the battery holder and push
the battery firmly into the battery holder until it snaps into place.
See Figure 3-42.
2 Lower the RAID battery assembly to the sled tray. See Figure 3-41.
3 Replace the two screws securing the RAID battery assembly to the sled
tray. See Figure 3-41.
4 Connect the RAID battery cable to the MegaRAID SAS 9285CV-8e card.
See Figure 3-41.
204
Installing System Components
1
Many repairs may only be done by a certified service technician. You
2
2 MegaRAID SAS 9285CV-8e RAID battery