Installing The Microsd Card Reader Support Bracket - Dell PowerEdge C8220X Hardware Owner's Manual

Installing the MicroSD Card Reader Support Bracket

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Align the MicroSD card reader support bracket with the screw holes on the
sled tray. See Figure 3-115.
2 Replace the two screws securing the MicroSD card reader support bracket.
See Figure 3-115.
3 Replace the MicroSD card reader. See "Installing the MicroSD Card
Reader" on page 308.
4 If applicable, replace the mezzanine card. See "Installing the SAS
Mezzanine Card" on page 297, "Installing the Infiniband Mezzanine Card"
on page 301, or "Installing the 10 GbE Mezzanine Card" on page 304.
5 If applicable, replace the RAID battery. See "Installing the MegaRAID SAS
9285CV-8e RAID Battery" on page 204.
6 Close the sled. See "Installing the Front and Back Sled Covers" on
page 180 or "Installing the Sled Cover" on page 183.
7 Replace the sled. See "Installing a Sled" on page 156.
310
Installing System Components
Many repairs may only be done by a certified service technician. You