Mezzanine and OCP cards
Removing a mezzanine card
Prerequisites
NOTE:
The procedure to remove the mezzanine blank is similar to the removal of a mezzanine card.
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the expansion card riser
Steps
1. Remove the screws that secure the mezzanine card to the sled.
2. Lift the mezzanine card out of the sled.
NOTE:
Install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
Safety
instructions.
Before working inside your
assembly.
system.
Installing and removing enclosure components
71