Installing A Microsd Card - Dell PowerEdge C8220X Hardware Owner's Manual

1 release latch
3 MicroSD card

Installing a MicroSD Card

Media memory cards are generally marked with a symbol (such as a triangle or
an arrow) or a label to indicate which end to insert into the slot. The cards are
keyed to prevent incorrect insertion. If card orientation is not clear, see the
documentation that came with the card.
NOTE:
To use an MicroSD card with your sled, ensure that the MicroSD card slot is
enabled in the System Setup program. See "Using the System Setup Program" on
page 59.
1 Hold the MicroSD card with the label side facing to the right.
See Figure 3-22.
2 Press the card into the slot to lock into place. See Figure 3-22.
If you encounter too much resistance, do not force the card. Check the
card orientation and try again.
3 Slide the sled into the chassis until the sled is fully seated and the release
lever snaps into place. See Figure 3-22.
2 handle
4 MicroSD card slot
Installing System Components
175