Removing the 10 GbE Mezzanine Card
CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the enclosure. See "Removing a Sled" on page 155.
2 Open the sled. See "Removing the Front and Back Sled Covers" on
page 176 or "Removing the Sled Cover" on page 181.
3 Remove the two screws securing the 10 GbE mezzanine card assembly to
the sled tray. See Figure 3-110.
4 Lift the 10 GbE mezzanine card assembly out of the sled tray.
See Figure 3-110.
Figure 3-110. Removing and Installing the 10 GbE Mezzanine Card Assembly
1
1
M3 screws (2)
302
Installing System Components
Many repairs may only be done by a certified service technician. You
2
2
10 GbE mezzanine card assembly