Installing The Riser Card For 1U Node; Optional Mezzanine Cards - Dell PowerEdge C6320 Owner's Manual

Figure 45. Removing and installing the riser card
1. screw (2)
3. expansion-card bracket
Related Information
Removing a system-board assembly
Removing the expansion card for 1U node

Installing the riser card for 1U node

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Place the riser card into the expansion-card bracket.
2. Replace the two screws securing the riser card to the expansion-card bracket.
3. Install the expansion card.
4. Replace the system-board assembly.
Related Information
Installing the expansion card for 1U node
Installing a system-board assembly

Optional mezzanine cards

The optional Mezzanine cards supported on C6320 are:
1. LSI 2008
2. Dual Port 1GbE
76
2. riser card