Installing A Heat Sink Blank - Dell PowerEdge C8220X Hardware Owner's Manual

Figure 3-97. Removing and Installing the Heat Sink Blank
1 screws (2)

Installing a Heat Sink Blank

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 If you are permanently removing a processor from the socket CPU2, you
must install a socket protector and heat sink blank to ensure proper system
cooling.
2 Place the heat sink blank on the processor socket.
3 Tighten the two retention screws on the heat sink blank. See Figure 3-97.
4 Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 277.
5 Close the sled. See "Installing the Front and Back Sled Covers" on
page 180 or "Installing the Sled Cover" on page 183.
6 Replace the sled. See "Installing a Sled" on page 156.
282
Installing System Components
1
Many repairs may only be done by a certified service technician. You
CPU1
2 heat sink blank
2
CPU2