Dell PowerEdge C8220X Hardware Owner's Manual page 187

1 SATA connector 5
3 mini-SAS connector 0
5 HDD4 connector
7 SGPIO connector 2 on hot-plug
hard-drive backplane
9 system board control connector
11 power connector on NPDB
13 power connector on interposer
extender
15 I2C connector on system board
17 power connector on system board
19 SATA_IN connector 5
6 Remove the two screws securing the hot-plug hard-drive backplane.
See Figure 3-32.
7 Pull the backplane away from the front cover. See Figure 3-32.
Figure 3-32. Removing and Installing the 2.5-inch Hot-Plug Hard-Drive Backplane
1 hot-plug hard-drive backplane
2 SATA connector 4
4 HDD3 connector
6 power connector on hot-plug
hard-drive backplane
8 power connector on NPDB
10 I2C connector on NPDB
12 power connector on NPDB
14 power connector on system board
16 front panel connector 1
18 SATA_IN connector 4
1
2 M3 screws (2)
Installing System Components
2
187