Table 5-1. System Board Jumper Settings
Item
Jumper
4
BIOS recovery
5
Password enable
6
Power button
pass
System Board V1.1 Jumper Settings
Figure 5-2. System Board V1.1 Jumper Settings
7
Setting
(default) The BIOS recovery jumper is disabled.
(default) The password feature is enabled.
(default) The BMC triggers a power button signal.
1
2
6
5
4
Description
The BIOS recovery jumper enables the
BIOS flash memory special recovery
mode.
The password feature is disabled.
The power button passthrough signal is
triggered.
3
Jumpers and Connectors
351