On The Sled Tray - Dell PowerEdge C8220X Hardware Owner's Manual

3 Loosen the thumbscrew securing the hard-drive carrier to the hard-drive
bracket. See Figure 3-19.
4 Slide and lift the hard-drive carrier out of the sled tray. See Figure 3-19.
Figure 3-19. Removing and Installing a Hard-Drive Carrier Located on the Sled Tray
1 thumbscrew
Installing a Hard-Drive Carrier on the Sled Tray
CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Place the hard-drive carrier into the sled tray and slide into place.
See Figure 3-19.
2 Tighten the thumbscrew to secure the hard-drive carrier in place.
See Figure 3-19.
3 Close the sled. See "Installing the Front and Back Sled Covers" on
page 180 or "Installing the Sled Cover" on page 183.
4 Replace the sled. See "Installing a Sled" on page 156.
170
Installing System Components
Many repairs may only be done by a certified service technician. You
1
2 hard-drive carrier
2