Current Configuration Settings; Logout - D-Link DGS-3600 Series User Manual

Current Configuration Settings

The Current Configuration Settings window allows users to manipulate configuration images saved in the Flash memory of the
Switch.
To view this window, click Save Services > Current Configuration Settings, as shown below.
This window offers the following information:
Parameter
Configuration File Enter the configuration file located on the Flash drive to be altered.
Action This field has two options for configuration.
Click Apply to implement changes made.

Logout

Use the Logout page to logout of the Switch's Web-based management agent by clicking on the Logout button.
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 13- 5. Current Configuration Settings window
Description
Boot – Select this option to set the configuration file specified above as the boot up

configuration for the Switch. This saved configuration will be set as the boot up file
after a switch reboot has been performed. The default setting has configuration file
C:/STARTUP.CFG as the boot up configuration file for the Switch unless specified
here.
Active - Choosing this parameter will first load and then activate this configuration

file on the Switch.
Figure 13- 6. Logout window
375