Protocol Vlan Port Settings - D-Link DGS-3600 Series User Manual

Protocol VLAN Port Settings

The following window is used to add a Protocol VLAN Group profile to a port or list of ports and adjust the tags for incoming
untagged packets before being relayed through the Switch.
To view this window, click L2 Features > VLAN > Protocol VLAN > Protocol VLAN Port Settings, as shown below.
The following fields may be configured:
Parameter Description
Port List Use this parameter to assign ports to a Protocol VLAN Group or remove them from the Protocol
VLAN Group. Ticking the Select All Ports check box will configure this Protocol VLAN Group to
all ports on the switch.
Action Use the pull-down menu to add or delete the following Group ID to or from the ports selected in
the previous field.
Group ID (1-16) Enter the ID number of the Protocol VLAN Group for which to add or remove from the selected
ports. Ticking the Select All Groups check box will apply all Protocol VLAN groups to the ports
listed in the Port List field.
VLAN ID / VLAN Use this field to add a VLAN to be associated with this configuration. Select the correct radio
Name button if you are using a VLAN Name or a VID (VLAN ID).
Click Apply to implement changes made. The Protocol VLAN Port Table in the bottom half of the window will display correctly
configured ports to Protocol Group configurations, along with associated VLANs and priorities. Users may use the Port List
Search in the middle of the window to display configurations based on ports on the switch. Clicking the
Port Table Entries link will display all Protocol VLAN Port Table entries.
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 7- 18. Protocol VLAN Port Settings window
105
Show All Protocol VLAN