Bandwidth Control - D-Link DGS-3600 Series User Manual

Bandwidth Control

The bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected port.
To view the Bandwidth Control window, click QoS > Bandwidth Control, as shown below.
The following parameters can be set or are displayed:
Parameter Description
Unit
From...To
Type
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 9- 2. Bandwidth Settings window
Select the unit you wish to configure.
A consecutive group of ports may be configured starting with the selected port.
This drop-down menu allows you to select between RX (receive), TX (transmit), and
237