The window shown below is the CPU Interface Filtering Configuration window for the Packet Content Mask.
Figure 10- 28. CPU Interface Filtering Configuration window (Packet Content)
This window will aid the user in configuring the Switch to mask packet headers beginning with the offset value specified. The
following fields are used to configure the Packet Content Mask:
Parameter
Profile ID (1-5)
Type
®
xStack
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Description
Type in a unique identifier number for this profile set. This value can be set from 1 to 5.
Select profile based on Ethernet (MAC Address), IP address or Packet Content Mask or
IPv6 address. This will change the menu according to the requirements for the type of
profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
header.
Select IP to instruct the Switch to examine the IP address in each frame's
header.
Select Packet Content Mask to specify a mask to hide the content of the packet
header.
266