MAC Based Access Control Authentication
This window is used to clear previously configured MAC Based Access Control Authentication entries.
To view the Browse ARP table, click Monitoring > MAC Based Access Control Authentication, as shown below.
The The following fields can be configured:
Parameter
Description
Ports
(e.g:1,5,7-
Enter the range of ports you wish to clear and click Clear, to clear all ports check the All Ports
12)
check box before clicking Clear.
MAC Address
Enter the MAC Address of the entry you wish to clear, and click Clear.
®
xStack
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 12- 50. ARP Table window
Figure 12- 51. ARP Table window
372