Connecting To Network Backbone Or Server - D-Link DGS-3600 Series User Manual

®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch

Connecting To Network Backbone or Server

The two Mini-GBIC combo ports are ideal for uplinking to a network backbone or server. The copper ports operate at a speed of
1000, 100, or 10Mbps in full duplex mode. The fiber optic ports can operate at 1000Mbps in full duplex mode. Connections to the
Gigabit Ethernet ports are made using fiber optic cable or Category 5 copper cable, depending on the type of port. A valid
connection is indicated when the Link LED is lit.
Figure 3- 3. Uplink Connection to a server, PC or switch stack
18