D-Link DGS-3600 Series User Manual page 147

65535)
MSTI ID
VID List
Clicking the Add button will reveal the following window to configure:
The user may configure the following parameters to create a MSTI in the Switch.
Parameter
MSTI ID
Type
VID List (1-4094)
Click Apply to implement changes made.
To configure the settings for the CIST, click on its hyperlinked name in the MST Configuration Identification window, which
will reveal the following window to configure:
The user may configure the following parameters to configure the CIST on the Switch.
Parameter Description
MSTI ID The MSTI ID of the CIST is 0 and cannot be altered.
Type This field allows the user to choose a desired method for altering the MSTI settings. The user
has 2 choices.
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
the Switch. The user may choose a value between 0 and 65535 with a default setting of 0.
This field shows the MSTI IDs currently set on the Switch. This field will always have the
CIST MSTI, which may be configured but not deleted. Clicking the hyperlinked name will
open a new window for configuring parameters associated with that particular MSTI.
This field displays the VLAN IDs associated with the specific MSTI.
Figure 7- 43. Instance ID Settings window – Add
Description
Enter a number between 1 and 15 to set a new MSTI on the Switch.
Create is selected to create a new MSTI. No other choices are available for this field when
creating a new MSTI.
This field is used to specify the VID range from configured VLANs set on the Switch.
Supported VIDs on the Switch range from ID number 1 to 4094.
Figure 7- 44. Instance ID Settings window - CIST modify
Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction with the

VID List parameter.
129