Port Security Entries - D-Link DGS-3600 Series User Manual

Parameter
Unit
From...To
Admin State
Max. Learning
Addr. (0-16)
Lock Address
Mode
Click Apply to implement changes made.

Port Security Entries

This window is used to remove an entry from the port security entries learned by the Switch and entered into the forwarding
database.
To view the following window, click Security > Port Security > Port Security Entries, as shown below.
This function is only operable if the Mode in the Port Security window is selected as Permanent or DeleteOnReset, or in other
words, only addresses that are permanently learned by the Switch can be deleted on reset. Once the entry has been defined by
entering the correct information into the window above, click the
to be deleted. Only entries marked Secured_Permanent can be deleted. Click the Next button to view the next page of entries
listed in this table. This window displays the following information:
Parameter Description
VID The VLAN ID of the entry in the forwarding database table that has been permanently learned by
the Switch.
VLAN NAME The VLAN Name of the entry in the forwarding database table that has been permanently learned
by the Switch.
MAC Address The MAC address of the entry in the forwarding database table that has been permanently learned
by the Switch.
Unit Enter the unit you wish to configure.
Port The ID number of the port that has permanently learned the MAC address.
Type The type of MAC address in the forwarding database table. Only entries marked
Secured_Permanent can be deleted.
Delete
Click the
the Switch.
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Description
Select the unit you wish to configure.
A consecutive group of ports may be configured starting with the selected port.
This pull-down menu allows users to enable or disable Port Security (locked MAC address
table for the selected ports).
The number of MAC addresses that will be in the MAC address-forwarding table for the
selected switch and group of ports.
This pull-down menu allows you to select how the MAC address table locking will be
implemented on the Switch, for the selected group of ports. The options are:
Permanent – The locked addresses will not age out.

DeleteOnTimeout – The locked addresses will age out after the aging timer

expires.
DeleteOnReset – The locked addresses will not age out until the Switch has been

reset.
Figure 11- 3. Port Security Entries Table window
in this field to delete the corresponding MAC address that was permanently learned by
under the Delete heading of the corresponding MAC address
282