®
xStack
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Browse IGMP Group Table
This window will show current IGMP group entries on the Switch. To search a specific IGMP group entry, enter an interface
name into the Interface Name field or a Multicast Group IP address and click Find.
To view this window, click Monitoring > Browse IGMP Group Table, as shown below.
Figure 12- 39. IGMP Group Table window
DVMRP Monitor
This folder allows the DVMRP (Distance-Vector Multicast Routing Protocol) to be monitored for each IP interface defined on the
Switch. The DVMRP monitor section offers three windows for monitoring: Browse DVMRP Routing Table, Browse DVMRP
Neighbor Table, and Browse DVMRP Routing Next Hop Table.
Browse DVMRP Routing Table
Multicast routing information is gathered and stored by DVMRP in the DVMRP Routing Table, this window, contains one row
for each port in a DVMRP mode. Each routing entry contains information about the source and multicast group, and incoming and
outgoing interfaces. You may define your search by entering a Source IP Address and its subnet mask into the fields at the top of
the window, and click Find.
To view this window, click Monitoring > DVMRP Monitor > Browse DVMRP Routing Table
Figure 12- 40. DVMRP Routing Table window
Browse DVMRP Neighbor Table
This table contains information about DVMRP neighbors of the Switch. To search this table, enter an Interface Name, Neighbor
Address or Source Netmask into the respective field and click the Find button. DVMRP neighbors of that entry will appear in the
DVMRP Neighbor Table below.
To view this window, click Monitoring > DVMRP Monitor > Browse DVMRP Neighbor Table, as shown below.
366