Qinq Global Settings - D-Link DGS-3600 Series User Manual

QinQ Global Settings

This function allows the user to enable or disable the
QinQ function.
To view this window click L2 Features > QinQ >
Global Settings, as shown.
The following fields can be set:
Parameter
QinQ Global State
From...To
Role
Missdrop
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Description
Use the pull down menu to Enable or Disable the QinQ Global State. When QinQ is Enabled,
all network port roles will have NNI ports and their outer TPID set to 0x88a8. All existing static
VLANs will run as SP-VLANs. All dynamically learned L2 addresses and all dynamically
registered VLAN entries will be cleared, GVRP will be disabled. According 802.1ad, the
address 01-80-c2-00-00-08 will be used for STP in the provider's network. So the user shall
disable STP first, and then use the new address for STP state machine. The default setting is
Disabled.
A consecutive group of ports that are part of the VLAN configuration starting with the selected
port.
The user can choose between UNI or NNI role.
UNI – To select a user-to-network interface which specifies that communication between the
specified user and a specified network will occur.
NNI – To select a network-to-network interface specifies that communication between two
specified networks will occur.
Enable or Disable C-VLAN based on SP-VLAN assignment miss drop. When enabled the
Figure 7- 64. QinQ Global Settings window
147