D-Link DGS-3600 Series User Manual page 92

Countdown Time
Address
Port
Max Datagram Size
Modify
Delete
To add a new sFlow Analyzer, click the Add button in the previous window that will display the following window to be
configured:
The following fields can be set or modified:
Parameter
Analyzer Server (1-
4)
Owner
Timeout (1-2000000
sec)
Collector Address
Collector Port (1-
65535)
Max Datagram Size
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Displays the current time remaining before this Analyzer server times out. When the server
times out, all sFlow samples and counter polls associated with this server will be deleted.
Displays the IP address of the sFlow Analyzer Server. This IP address is where sFlow
datagrams will be sent for analysis.
Displays the previously configured UDP port where sFlow datagrams will be sent for analysis.
This field displays the maximum number of data bytes in a single sFlow datagram that will be
sent to this sFlow Analyzer Server.
Click the Modify button to display the sFlow Counter Analyzer Edit window, so that users
may edit the settings for this server.
Click the corresponding
Figure 6- 55. sFlow Counter Analyzer – Add window
Description
Enter an integer from 1 to 4 to denote the sFlow Analyzer to be added. Up to four entries can
be added.
Users may enter an alphanumeric string of up to 16 characters to define the owner of this
entry. Users are encouraged to give this field a name that will help them identify this entry.
When an entry is made in this field, the following Timeout field is automatically set to 400
seconds, unless the user alters the Timeout field.
This field is used to specify the timeout for the Analyzer server. When the server times out, all
sFlow samples and counter polls associated with this server will be deleted. The user may set
a time between 1 and 2000000 seconds with a default setting of 400 seconds. Infinite can be
selected to ensure that it never times out.
The IP address of the sFlow Analyzer Server. If this field is not specified, the entry will become
0.0.0.0 and therefore the entry will be inactive. Users must set this field.
The destination UDP port where sFlow datagrams will be sent. The default setting for this field
is 6343.
This field will specify the maximum number of data bytes that can be packaged into a single
button of the entry to be deleted.
74