D-Link DGS-3600 Series User Manual page 183

Layer 3 gigabit ethernet managed switch
Hide thumbs Also See for DGS-3600 Series:
Table of Contents

Advertisement

Interface
Next Hop Address
Metric (1-65535)
Protocol
Backup
Delete
To enter an IPv6 Interface into the IPv6 Static Route list, click the Add button, revealing the following window to configure.
Tick the default check box if this will be the default IPv6 route. Choosing this option will allow the user to configure the default
gateway for the next hop router only.
The following fields can be set:
Parameter
Interface Name
IPv6
Address/Prefix
Length
Next Hop Address
Metric (1-65535)
Backup State
Click Apply to implement changes made.
®
xStack
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
The IP Interface where the static IPv6 route is created.
The corresponding IPv6 address for the next hop Gateway address in IPv6 format.
The metric of the IPv6 interface entered into the table representing the number of routers
between the Switch and the IPv6 address above. Metric values allowed are between 1
and 65535.
Represents the status for the IPv6 routing table entry.
This field will indicate the role of this interface for the IPv6 network connection for the
switch, whether Primary or Backup.
Click the
button to delete this entry from the list.
Figure 8- 14. IPv6 Static Route Settings – Add window
Description
The IP Interface where the static IPv6 route is to be created.
Specify the address and mask information using the format as IPv6 address / prefix length
(IPv6 address is hexadecimal number, prefix length is decimal number, for example
1234:5D7F/32).
Ticking the default check box will set the IPv6 address as unspecified and the Switch will
automatically find the default route. This defines the entry as a 1 hop IPv6 default route.
Enter the IPv6 address for the next hop Gateway address in IPv6 format.
The metric representing the number of routers between the Switch and the IPv6 address
above.
The user may choose between Primary and Backup. If the Primary Static/Default Route
fails, the Backup Route will support the entry. Please take note that the Primary and
Backup entries cannot have the same Gateway.
165

Advertisement

Table of Contents
loading

Table of Contents