D-Link DGS-3600 Series User Manual page 317
Layer 3 gigabit ethernet managed switch
Hide thumbs
Also See for DGS-3600 Series:
- Cli manual (431 pages) ,
- User manual (422 pages) ,
- Hardware installation manual (66 pages)
Table of Contents
Advertisement
To reauthenticate ports, first choose the switch in the switch stack by using the pull-down menu and then choose the range of ports
in the From and To field. Then the user must specify the MAC address to be reauthenticated by entering it into the MAC Address
field and ticking the corresponding check box. To begin the reauthentication, click Apply.
This window displays the following information:
Parameter
Description
Port
The port number of the reauthenticated port.
MAC Address
Displays the physical address of the Switch where the port resides.
Auth PAE State
The Authenticator State will display one of the following: Initialize, Disconnected, Connecting,
Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth, and N/A.
BackendState
The Backend State will display one of the following: Request, Response, Success, Fail, Timeout,
Idle, Initialize, and N/A.
The status of the controlled port can be Authorized, Unauthorized, or N/A.
PortStatus
®
xStack
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 11- 25. Reauthenticate Port(s) window (MAC-based 802.1X)
299
Advertisement
Table of Contents
