Switch Maintenance; Reset; Reboot System - D-Link DGS-3600 Series User Manual

Layer 3 gigabit ethernet managed switch
Hide thumbs Also See for DGS-3600 Series:
Table of Contents

Advertisement

Switch Maintenance

Reset

Reboot System

Save Services
Logout
Reset
The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be retained
while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default parameters into the Switch's
non-volatile RAM, and then restart the Switch. All other options enter the factory defaults into the
current configuration, but do not save this configuration. Reset System will return the Switch's
configuration to the state it was when it left the factory
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration parameters
to their factory defaults. If the Switch is reset using this window, and Save Changes is not executed, the Switch will return to the
last saved configuration when rebooted.
Reboot System
The following window is used to restart the
Switch.
All of the configuration information entered from
the last time Save Changes was executed will be
lost. Click the Restart button to restart the
Switch.
®
xStack
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 13- 1. Reset window
Section 13
Figure 13- 2. Reboot System window
373

Advertisement

Table of Contents
loading

Table of Contents