Mac-Based Access Control Authentication State - D-Link DGS-3000 series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
Figure 8-39 MAC-based Access Control Local Settings – Edit by Name window
To change the selected MAC address' VID value, the user can click the Edit by ID button.
Figure 8-40 MAC-based Access Control Local Settings – Edit by ID window
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

MAC-based Access Control Authentication State

This window is used to display MAC-based access control authentication state information.
To view this window, click Security > MAC-based Access Control (MAC) > MAC-based Access Control
Authentication State as shown below:
The fields that can be configured are described below:
Parameter
Port List
Click the Find button to locate a specific entry based on the information entered.
Click the Clear by Port button to clear all the information linked to the port number entered.
Click the View All Hosts button to display all the existing hosts.
Click the Clear All Hosts button to clear out all the existing hosts.
Figure 8-41 MAC-based Access Control Authentication State window
Description
Enter a list of ports to be displayed.
211