Ir Commands - Elan System12 Installation Manual And User's Manual

E L A N H O M E S Y S T E M S
Programming
(continued)

IR Commands

The following list contains the IR commands for the
S12. These commands are included in the IR Library
of VIA! TOOLS version 5.0 and higher. Please refer to
®
VIA!TOOLS Help for specific information about these
commands and how to use them.
There are three types of commands:
• System Commands
• Video Commands
• External IR Commands
System Commands
SYS OFF
• Turns all 8 zones off.
• If multiple chassis are used ENSURE the expansion
cable is connected and send this command to the
first chassis.
ZONE OFF
• Turns a single zone off.
ZONE ON
• Turns a single zone on.
• Turns the zone on to the last selected source.
ZONE TOG
• Toggles a zone from off to on to off.
DND OFF
• Disables Do Not Disturb in a zone.
• Works if the zone is off or on.
DND ON
• Enables Do Not Disturb zone.
• Works if the zone is off or on.
DND TOG
• Toggles a zone's Do Not Disturb from off to on to off.
• Works if the zone is off or on.
WHM OFF
• Disables Whole House Music in a zone.
• If any zone in the group is turned off, WHM is
disabled.
• Has no effect if the zone is off.
WHM ON
• Enables Whole House Music zone.
• Has no effect if the zone is off.
WHM TOG
• Toggles a zone's Whole House Music from off to on
to off.
© ELAN Home Systems 2004 • All rights reserved.
SYSTEM12
• If any zone in the group is turned off, WHM is
disabled.
• Has no effect if the zone is off.
MUTE OFF
• Disables Mute in a zone.
• Has no effect if the zone is off.
MUTE ON
• Enables zone Mute.
• Has no effect if the zone is off.
MUTE TOG
• Toggles a zone's Mute from off to on to off.
• Has no effect if the zone is off.
DRC OFF
• Disables Dynamic Range Compression in a zone.
• Has no effect if the zone is off.
DRC ON
• Enables Dynamic Range Compression in a zone.
• Has no effect if the zone is off.
DRC TOG
• Toggles a zone's Dynamic Range Compression from
off to on to off.
• Has no effect if the zone is off.
EQ FLAT
• Sets the Treble and Bass to zero in a zone.
TREB DOWN
• Decreases the treble in a zone.
• Has no effect if the zone is off.
TREB UP
• Increases the treble in a zone.
• Has no effect if the zone is off.
BASS DOWN
• Decreases the bass in a zone.
• Has no effect if the zone is off.
BASS UP
• Increases the bass in a zone.
• Has no effect if the zone is off.
VOLUME DOWN
• Decreases the volume in a zone.
• Has no effect if the zone is off.
VOLUME UP
• Increases the volume in a zone.
• Has no effect if the zone is off.
INSTALLATION MANUAL
Page 59