SYSTEM12
INSTALLATION MANUAL
PS12 Front Panel Connections
To Sense Inputs
After punching-down sensors to the Sense Trigger Inputs on the rear of the PS12,
simply plug 3.5mm stereo interconnect cables from the front of the PS12 to the
desired Sense Trigger Inputs of the S12. Make absolutely sure to maintain correct
input/output relationship (Sense 1 on the back of the PS12 must be connected to
Sense 1 on the S12).
Page 30
(continued)
PS12 To Sense Inputs to S12 Sense Trigger Inputs
(Sense Triggers 1-3 shown)
TO SENSE INPUTS
USE STEREO 3.5mm PLUGS ONLY
1
2
3
E L A N
5
6
4
© ELAN Home Systems 2004 • All rights reserved.
H O M E
S Y S T E M S