Electronic Volume Control Connections - Elan System12 Installation Manual And User's Manual

SYSTEM12
INSTALLATION MANUAL
Connections When Not Using a PS12
VSE/VSE100/VEHP Electronic Volume Control Connections
(No PVSE)
If not using a PS12 or a PVSE Precision Panel, interconnects will need to be made
between the electronic volume control, the S12, the Z•600 Communications Controller,
and the system amplifier. These connections include IR, 12VDC, Ground, and Override,
as shown below. Please note the Z•600 Control Output connections: WH/ORANGE ties to
WH/BROWN. GREEN is VC- and Brown is VC+.
Tip (Blue)
Page 34
(continued)
ELAN Precision Panels save
TO SENSE INPUTS USE STEREO 3.5mm PLUGS ONLY EXT IR ANTENNA
XM FM
1 2 3 4 5 6 MONO
ZONE LOCAL ZONE LOCAL ZONE LOCAL
1 1 2 2 3 3
time and make sense out
ZONE LOCAL ZONE LOCAL ZONE LOCAL
4 4 5 5 6 6
ZONE LOCAL VIA!POWER ZONE LOCAL
+ - -
7 7 8 8
of complex wiring jobs!
16VDC / 10A
16VDC / 4A
VIA!NET
E L A N H O M E
© ELAN Home Systems 2004 • All rights reserved.
S Y S T E M S