E L A N
H O M E
S Y S T E M S
PS12 Front Panel Connections
Zone Keypad Input Connections
Connect a straight-through RJ-45 interconnect cable (ELAN C4545 1 or 2 meter)
between the S12's 1-8 Zone Keypad Inputs and the PS12's Zone 1-8 RJ-45 jacks.
This routes all keypads, touch panels, and IR receivers punched-down on the
back of the PS12 directly to the S12.
Local Source Input Connections
Once the local sources are punched-down on the rear of the PS12, plug an
RJ45 interconnect cable (ELAN C4545) between the Local Source RJ-45 jack
of the PS12 and the corresponding Local Source Input RJ-45 jack of the S12.
These local sources will act as a thirteenth source, but will only be available in
the zone to which they are connected.
© ELAN Home Systems 2004 • All rights reserved.
PS12 to S12 Zone Keypad Connections
PS12
ZONE
LOCAL
1
ELAN
C4545
S12
PS12 to S12 Local Source Connections (Zone 1 Shown)
PS12
ZONE
LOCAL
1
1
ELAN
C4545
S12
(Zone 1 shown)
1
S12
SYSTEM12
INSTALLATION MANUAL
Page 27