PRIMEQUEST 1000 Series General Description
CHAPTER 4 Functions Provided by the PRIMEQUEST 1000 Series
4.5
Power Supply Monitoring and Control
This section describes the system operations during power supply monitoring and at failure occurrence.
4.5.1
PSU configuration
This section describes the configuration of the PSU (power supply unit).
The following table lists the maximum number of PSUs and the required number of PSUs.
TABLE 4.1 Maximum number of PSUs and required number of PSUs
Maximum number of PSUs
Required number of PSUs 100 V
The following table lists the power feed setups.
Remarks
- The PRIMEQUEST 1800E2/1800E does not support a 100 V environment.
- In a 200 V environment, the PRIMEQUEST 1800E2/1800E supports dual power feed configurations and the
primary power feed, non-redundant configurations and N+1 redundant configurations.
TABLE 4.2 Power feed setups
Input voltage
Power feeding
100V
Primary power feed
Primary power feed
200V
Dual power feed
"(Default)" indicates the basic setup for the product. Other formats are options.
The following table lists the PSU mounting locations.
1800E2/
1800E
4
Not supported
200 V
2
Redundant
method
Non-redundant
Redundant
Non-redundant
Redundant
Redundant
1800E2/
1800E
Not supported
Not supported
2+0
(Default)
2+1
2x2
99
C122-B022-11EN