Remote Power Supply Control - Fujitsu Primergy RX300 S4 User Manual

C.2

Remote Power Supply Control

This section explains how to control the server power supply remotely.
The server power supply can be remote-controlled with the terminal software on the PC.
Starting up the remote controller
1
Start up the terminal software.
The remote control window appears.
****************************************
* Welcome to PRIMERGY Remote Manager
* Firmware Revision x.xxA (x.xx)
* SDRR *.**
* Firmware built xxx xx xxxx xx:xx:xx *
****************************************
System Type
System ID
System Name
System OS
System Status: OK
Power Status : On
Please enter user name :
Please enter pass phrase :
Power state is displayed next to "Power Status".
Display
On
Off
2
When "Please enter user name" appears, enter the user name and press the
[Enter] key.
ID 0203 RX300S4
: PRIMERGY RX300 S4
: xxxxxxxx
: RX300S4-2 (xxx.xxx.xxx.xxx)
: xxxxxxxx
table: Meaning of [Power Status]
The server is powered on.
The server is powered off.
PRIMERGY RX300 S4 User's Guide
*
*
*
Description
253