Fujitsu PRIMEQUEST 1000 Series General Description Manual page 168

PRIMEQUEST 1000 Series General Description
CHAPTER 8 Operations Management Tools
Function
category
ServerView Suite
ServerView Update Management
ServerView Suite
ServerView Update Manager Express
Installing BIOS and Firmware via ASPs
Installing Drivers and additional Software
via PSPs
SVDM Deploy ServerView Suite
ServerView Deployment Manager
SVmco ServerView Mission Critical Option
Notes
- You can use SVIM to install Windows or Linux on a partition in the PRIMEQUEST 1000 series server.
- When using SVDM with the PRIMEQUEST 1000 series server, check:
- Whether [Change Legacy Boot Order] in the [Boot Maintenance Manager] menu of the UEFI shows
the [HDD Device] device type at a higher position than the [Network Device] device type.
If it is not at a higher position, change the setting using the [Change the order] menu.
For precautions on ServerView Suite other than the above, contact the distributor where you purchased your product,
or your sales representative.
Corresponding manual Description
Manual that describes the function that
applies an update of a driver, firmware,
etc.
Manual that describes the function that
applies an update of firmware, etc. from
bootable media
Manual that describes the provisioning
function for servers (installation of an
operating system, application, etc.)
Manual that describes the essential
functions specific to PRIMEQUEST
(notification via the MMB, cluster linkage,
and hot replacement command)
146 C122-B022-11EN