General System Settings Configuration Examples
This section contains the following examples:
•
Configuring System and Banner Information
•
Configuring SNTP
•
Configuring the Time Manually
Configuring System and Banner Information
In this example, an administrator configures the following system
information:
•
System name: PC8024
•
System contact: Jane Doe
•
System location: RTP100
•
Asset tag: 006429
The administrator then configures the MOTD banner to alert other switch
administrators of an upcoming event.
To configure the switch:
1 Configure the hosts name.
console#configure
console(config)#hostname PC8024
2 Configure the contact, location, and asset tag. Notice that the prompt
changed to the host name.
PC8024(config)#snmp-server contact "Jane Doe"
PC8024(config)#snmp-server location RTP100
PC8024(config)#asset-tag 006429
3 Configure the message that displays when a user connects to the switch.
(config)#banner motd This switch connects users in
cubicles C121-C139."
(config)#exit
292
Managing General System Settings