Configuring Communities - Dell PowerConnect 8024 User Configuration Manual

Command
show snmp group
group_name
[ ]
show snmp user
user_name
[ ]

Configuring Communities

Beginning in Privileged EXEC mode, use the following commands to
configure access rights for SNMPv1 and SNMPv2.
Command
configure
snmp-server community
string
[ro | rw | su]
view-name
[view ]
ip_address
[ipaddress
Purpose
View SNMP group configuration information.
View SNMP user configuration information.
Purpose
Enter Global Configuration mode
Configure the community string and specify access criteria
for the community.
community-string —
•
]
authenticate the SNMP management station to the
switch. The string must also be defined on the NMS in
order for the NMS to access the SNMP agent on the
switch (Range: 1-20 characters)
—
• ro
Indicates read-only access
—
• rw Indicates read-write access.
view-name —
•
MIB view.
ip_address
• — Specifies the IP address of the management
station. If no IP address is specified, all management
stations are permitted
Acts as a password and is used to
Specifies the name of a previously defined
Configuring SNMP
325