iSCSI Optimization Configuration Examples
This section contains an example of how to configure iSCSI optimization on
a switch that is between a disk array and servers.
Configuring iSCSI Optimization Between Servers and a Disk Array
Figure 16-6 illustrates a PowerConnect 8024/8024F switch connecting two
servers (iSCSI initiators) to a disk array (iSCSI targets).
An iSCSI application running on the switch has installed priority filters to
ensure that iSCSI traffic that is part of these two sessions receives priority
treatment when forwarded in hardware.
Figure 16-6. iSCSI Optimization
Disc Array (iSCSI Targets)
10.1.1.3
10.1.1.2
Servers (iSCSI Initiators)
10.1.1.1
10.1.1.10
10.1.1.11
423
Configuring iSCSI Optimization