Figure 9-24. Add RADIUS Server
5 Click Apply.
6 Click RADIUS Server Configuration to return to the main page and
configure additional information about the RADIUS server.
7 If more than one RADIUS server has been added, select the IP address of
the RADIUS server to configure.
8 To configure a shared secret, select the Apply check box and enter the text
in the Secret field.
NOTE:
Configuration page. The global secret is applied to all RADIUS servers
unless you explicitly configure a different secret for a specific server.
9 To make the selected RADIUS server the primary server in the named
RADIUS Server Group, select Enable from the Primary Server menu.
10 Click Apply.
11 To view or remove a RADIUS server configured on the switch, click Show
All.
194
Controlling Management Access
You can configure a global secret on the RADIUS Global