Configuring Captive Portal Groups And Users - Dell PowerConnect 8024 User Configuration Manual

Configuring Captive Portal Groups and Users

Beginning in Privileged EXEC mode, use the following commands to create a
Captive Portal group. You can use the default group, or you can create a new
group.
Command
configure
captive-portal
group-id
user group
name
[name ]
user-id
user name
user-id
user password
password
user-id
user group
id
user-id
user session-
timeout
timeout
Purpose
Enter global configuration mode.
Enter Captive Portal mode.
Configure a group. Each Captive Portal that requires
authentication has a group associated with it. Only the
users who are members of that group can be authenticated
if they connect to the Captive Portal.
group-id
•
name
• — Group name (Range: 1–32 characters).
name
Create a new user for the local user authentication
database.
user-id
• —User ID (Range: 1–128).
name
• —user name (Range: 1–32 characters).
Configure the password for the specified user.
user-id
• —User ID (Range: 1–128).
password
•
group-
Associate a group with a Captive Portal user. A user can be
associated with more than one group.
user-id
• — User ID (Range: 1–128).
group-id
•
Enter the number of seconds to wait before terminating a
session for the specified user. The user is logged out once
the session timeout is reached.
user-id
• — User ID (Range: 1–128).
timeout
•
enforced (Range: 0–86400 seconds)
— Group ID (Range: 1–10).
—User password (Range: 8–64 characters).
— Group ID (Range: 1–10).
— Session timeout. 0 indicates timeout not
Configuring a Captive Portal
457