Dell PowerConnect 8024 User Configuration Manual page 220

Command
<CTRL + Z>
crypto certificate
number
request
exit
configure
crypto certificate
number
import
ip http secure-certificate
number
ip http secure-server
exit
220
Controlling Management Access
Purpose
Exit to Privileged EXEC mode.
Generate and display a certificate request for HTTPS. This
command takes you to Crypto Certificate Request mode.
In this mode, you can use the following commands to
specify certificate details:
• common-name
• country
• email
• location
• organization-name
• organization-unit
• unit
• state
Exit to Privileged EXEC mode.
Enter Global Configuration mode.
Import the certificate into the switch by pasting an
external certificate (signed by the Certification Authority)
to the switch. To end the session, add a period (.) on a
separate line after the input, and press ENTER. This
certificate replaces the self-signed certificate.
If the public key found in the certificate does not match
the switch's SSL RSA key, the command fails.
Specify the active certificate for HTTPS.
Allow access to the switch management interface by using
HTTPS, which is disabled by default.
Exit to Privileged EXEC mode.