Dell PowerConnect 8024 User Configuration Manual page 209

Command
ip-
permit ip-source
address mask
[mask
prefix-length interface-
] [
type interface-number
service
[service ] [priority
priority-value
]
interface-type
permit {
interface-number
}
service
[service ] [priority
priority-value
]
service
permit service
priority-value
[priority
exit
management access-
class {console-only |
name
}
exit
show management
access-class
show management
name
access-list [ ]
Purpose
Allow access to the management interface from hosts that
| meet the specified IP address value and other optional
criteria.
]
interface-type interface-number
•
VLAN interface, for example te1/0/13, port-channel 3, or
vlan 200.
ip-address
•
mask
• mask
IP address.
prefix-length
• mask
comprise the source IP address prefix. The prefix length
must be preceded by a forward slash (/). (Range: 0–32)
service
• service
the following: telnet, ssh, http, https, tftp, snmp, sntp, or
any.
priority-value
• priority
64)
Permit access to the management interface from the
specified port, VLAN, or LAG and meet the other optional
criteria.
Permit access to the management interface from the
] specified service.
Exit to Global Configuration mode.
Activate the management ACL or restrict access so that it
is available only through the console port.
Exit to Privileged EXEC mode.
Display information about the active management access
list.
Display information about the configured management
ACL and its rules.
— Source IP address.
— Specifies the network mask of the source
— Specifies the number of bits that
— Indicates service type. Can be one of
— Priority for the rule. (Range: 1 –
Controlling Management Access
— A valid port, LAG, or
209