Configuring The Primary And Secondary Radius Servers - Dell PowerConnect 8024 User Configuration Manual

5 Verify the management ACL configuration.
console#show management access-list
mgmt_ACL
--------
permit ip-source 10.27.65.0 mask 255.255.255.0
vlan 1 priority 1
permit ip-source 10.27.65.0 mask 255.255.255.0
Te1/0/9 priority 2
! (Note: all other access implicitly denied)
6 Verify that the configured management ACL is in use.
console#show management access-class
Management access-class is enabled, using access
list mgmt_ACL.

Configuring the Primary and Secondary RADIUS Servers

The commands in this example configure primary and secondary RADIUS
servers that the switch will use to authenticate access. The RADIUS servers
belong to the same named server group (Dell-RADIUS) and use the same
RADIUS secret (test1234). A third RADIUS server is configured as an
accounting server, and RADIUS accounting is globally enabled.
To configure the switch:
1 Configure the primary RADIUS server.
console#configure
console(config)#radius-server host auth
10.27.65.103
console(Config-auth-radius)#primary
console(Config-auth-radius)#name Dell-RADIUS
console(Config-auth-radius)#key test1234
console(Config-auth-radius)#exit
224
Controlling Management Access