Creating A Debug Log For Funk Security; Configuring Microsoft Security - Intermec CK61 User Manual

Chapter 2 — Connecting and Configuring the CK61
56
7 Select Prompt for password to have the user enter this password
each time to access the protocol, or select Use following password
to use the protocol without entering a password each time you use
the CK61.
8 Tap Additional Settings to set options for PAC management and
assign an anonymous EAP-FAST name.
9 Tap PAC Manager to view the PAC files currently installed on the
CK61. Tap OK to return to the Additional Settings screen.
10 If you already have a PAC on the CK61, clear Allow Automatic PAC
provisioning to avoid receiving more PACs from the server.
11 If you select Allow Automatic PAC provisioning, you can check:
• Prompt before acquiring a new PAC for notification of any
incoming PACs.
• Prompt before replacing a PAC for notification whether to
replace a current PAC with an incoming PAC.
12 For Anonymous EAP-FAST Name, type the outer identity assigned
for public usage.
13 Tap OK.

Creating A Debug Log for Funk Security

If you reach a situation where you need to send in debug information
to Intermec Product Support, you can use the Intermec Funk Security
logging feature.
To enable the logging feature
1 In the Profile Wizard, select the Advanced tab.
2 Select Enable Logging and then tap OK.

Configuring Microsoft Security

The default security setting is Funk. If you want to use Microsoft
security, you need to select it as your security choice. After you select
Microsoft as your security choice, you will be prompted to save your
settings and reset your computer for your change to take effect.
CK61 Handheld Computer User's Manual With Windows CE