Configuring Funk Security Using The Profile Wizard - Intermec CK61 User Manual

Chapter 2 — Connecting and Configuring the CK61
50
9 Exit Intermec Settings.
Configuring Static WEP Security With Funk Security
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and radio
parameters on your CK61.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security > Profile.
5 For Association, choose Open.
6 For Encryption, choose WEP.
7 For 802.1x, choose None.
8 Define a value for the keys you want to use. You can define up to
four keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5-byte value
for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must
be preceded by 0x and contain 5 or 13 hex pairs.
9 For Transmit key, choose the key you want to use for transmitting
data.
10 Exit Intermec Settings.

Configuring Funk Security Using the Profile Wizard

You can start 802.11a/ b/g communications on the CK61 using the
Profile Wizard. A profile contains all the information necessary to
authenticate you to the network, such as login name, password or
certificate, and protocols by which the CK61 is authenticated. You can
have up to four profiles for different networks. For example, you may
have different login names or passwords on different networks.
To select a profile for Funk security
1 Select the Windows icon > Settings > Control Panel > Wireless
Network.
or
CK61 Handheld Computer User's Manual With Windows CE