Intermec CK61 User Manual page 60

Chapter 2 — Connecting and Configuring the CK61
48
b For Validate Server Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can also
enter a Server Common Name if you want to increase your level
of security.
7 Save and exit Intermec Settings.
To enable WPA-PSK or WPA2-PSK with Funk security
1 Make sure you have configured the communications and radio
parameters on your CK61.
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security >
Profile.
5 For Association, choose WPA or WPA2 and tap OK.
6 For 8021.x, choose None.
7 For Pre-Shared Key, enter the pre-shared key or the passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the access point. The passphrase must be from 8 to 63 characters.
After you enter a passphrase, the CK61 internally converts it to a
pre-shared key.
This value must match the passphrase on the authenticator.
8 Save and exit Intermec Settings.
Configuring 802.1x Security With Funk Security
1 Make sure you have configured the communications and radio
parameters on your CK61.
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security >
Profile.
5 For Association, choose Open.
6 For Encryption, choose WEP.
CK61 Handheld Computer User's Manual With Windows CE