Creating A Debug Log For Funk Security; Configuring Microsoft Security - Intermec CK61 User Manual

Chapter 2 — Connecting and Configuring the CK61
60
• Prompt before acquiring a new PAC for notification of any
incoming PACs.
• Prompt before replacing a PAC for notification whether to
replace a current PAC with an incoming PAC.
12 For Anonymous EAP-FAST Name, type the outer identity assigned
for public usage.
13 Tap OK.

Creating A Debug Log for Funk Security

If you reach a situation where you need to send in debug information
to Intermec Product Support, you can use the Intermec Funk Security
logging feature.
To enable the logging feature
1 In the Profile Wizard, select the Advanced tab.
2 Select Enable Logging and then tap OK.

Configuring Microsoft Security

The default security setting is Funk. If you want to use Microsoft
security, you need to select it as your security choice. After you select
Microsoft as your security choice, you will be prompted to save your
settings and reset your computer for your change to take effect.
To select Microsoft security as your security choice
1 Tap Start > Settings > the Systems tab > Intermec Settings. The
Intermec Settings application appears.
2 Select Communications > 802.11 Radio > Security Choice.
3 From the Security Choice list, select Microsoft Security and save
your settings. An alert box appears telling you that you must save
your settings and warm boot the CK61 for the new security choice
to take effect.
4 Tap Yes. The CK61 resets and starts with Microsoft Security as the
Security Choice.
Networks already configured are preferred networks. You can connect
to only preferred networks or search for and connect to any available
network.
CK61 Handheld Computer User's Manual With Windows Mobile